FAQ  •  Inscription  •  Connexion

ProjetM ne tourne pas (2.6.32-41-lowlatency)

<<

Xzu

Message(s) : 108

Inscription : Lun 20 Juin 2011 09:15

Message Jeu 14 Juin 2012 16:15

ProjetM ne tourne pas (2.6.32-41-lowlatency)

Bonjour.

ProjetM ne tourne pas avec cette version de TS:

  Code :
Linux TangoStudio-desktop 2.6.32-41-lowlatency #89 SMP PREEMPT Fri May 18 12:01:11 UTC 2012 x86_64 GNU/Linux


Je n'obtiens que des couleurs qui clignotent.


Mais il tourne avec la version 3 du noyau, je ne sais pas s'il y as un rapport?
<<

Xzu

Message(s) : 108

Inscription : Lun 20 Juin 2011 09:15

Message Mer 27 Juin 2012 13:00

Re: ProjetM ne tourne pas (2.6.32-41-lowlatency)

Mince, alors il tourne chez vous?

Si j'ai juste une explication ou une piste de pourquoi il ne fonctionne pas, ça me va..
<<

nau

Message(s) : 383

Inscription : Ven 19 Nov 2010 00:06

Localisation : Liège, Belgique

Message Mer 27 Juin 2012 13:43

Re: ProjetM ne tourne pas (2.6.32-41-lowlatency)

Bein moi je n'utilise que les noyaux rt, et ça fonctionne. Voici ce que le terminal me dit ...

nau@labo2:~$ projectM-jack
dir:/usr/share/projectM/config.inp
reading ~/.projectM/config.inp
[projectM] config file: /home/nau/.projectM/config.inp
No Textures Loaded from /usr/share/projectM/textures
[projectM] Allocating idle preset...
[PresetFactory] path is Geiss & Sperl - Feedback (projectM idle HDR mix).milk
[PresetFactory] url is idle://Geiss & Sperl - Feedback (projectM idle HDR mix).milk
engine sample rate: 44100
Connecting to Jack port system:capture_1
Connecting to Jack port system:capture_2
Connecting to Jack port a2j:Midi Through [14] (capture): Midi Through Port-0
cannot connect input ports
Connecting to Jack port a2j:FastTrack Pro [16] (capture): FastTrack Pro MIDI 1
cannot connect input ports
Connecting to Jack port a2j:Faderfox DJ3 [20] (capture): Faderfox DJ3 MIDI 1
cannot connect input ports
Connecting to Jack port a2j:MPU-401 UART [28] (capture): MPU-401 UART MIDI
cannot connect input ports
Connecting to Jack port audacious-jack_2341_000:out_0
Connecting to Jack port audacious-jack_2341_000:out_1
[PresetFactory] path is r/share/projectM/presets/Unchained - Cranked On Failure.milk
[PresetFactory] url is /usr/share/projectM/presets/Unchained - Cranked On Failure.milk
[PresetFactory] path is r/share/projectM/presets/bmelgren - Take this highway.milk
[PresetFactory] url is /usr/share/projectM/presets/bmelgren - Take this highway.milk
[PresetFactory] path is r/share/projectM/presets/Rovastar - Altars Of Madness (Duel Mix).milk
[PresetFactory] url is /usr/share/projectM/presets/Rovastar - Altars Of Madness (Duel Mix).milk
[PresetFactory] path is r/share/projectM/presets/Rovastar - Magic Carpet.milk
[PresetFactory] url is /usr/share/projectM/presets/Rovastar - Magic Carpet.milk
[PresetFactory] path is r/share/projectM/presets/Rovastar - Decreasing Dreams (Extended Movement Mix).milk
[PresetFactory] url is /usr/share/projectM/presets/Rovastar - Decreasing Dreams (Extended Movement Mix).milk


Que dit ton terminal lors des essais infructueux ?
<<

Xzu

Message(s) : 108

Inscription : Lun 20 Juin 2011 09:15

Message Mer 27 Juin 2012 15:45

Re: ProjetM ne tourne pas (2.6.32-41-lowlatency)

Salut, moi il dit ça:

  Code :
tangxzu@TangoStudio-desktop:~$ projectM-jack
dir:/usr/share/projectM/config.inp
reading ~/.projectM/config.inp
[projectM] config file: /home/tangxzu/.projectM/config.inp
No Textures Loaded from /usr/share/projectM/textures
[projectM] Allocating idle preset...
[PresetFactory] path is Geiss & Sperl - Feedback (projectM idle HDR mix).milk
[PresetFactory] url is idle://Geiss & Sperl - Feedback (projectM idle HDR mix).milk
Jack: JackClient::SetupDriverSync driver sem in flush mode
Jack: JackPosixSemaphore::Connect name = jack_sem.1000_default_projectM-jack
Jack: JackPosixSemaphore::Connect sem_getvalue 0
Jack: Clock source : system clock via clock_gettime
Jack: JackLibClient::Open name = projectM-jack refnum = 3
engine sample rate: 44100
Jack: JackClient::PortRegister ref = 3 name = projectM-jack:input type = 32 bit float mono audio port_index = 23
Jack: JackClient::Activate
Jack: JackClient::StartThread : period = 23219 computation = 100 constraint = 23219
Jack: Create non RT thread
Jack: ThreadHandler: start
Jack: JackClient::kBufferSizeCallback buffer_size = 1024
Jack: JackPosixThread::AcquireRealTimeImp priority = 75
Jack: JackClient::ClientNotify ref = 3 name = projectM-jack notify = 2
Jack: JackClient::kActivateClient name = projectM-jack ref = 3
Connecting to Jack port system:capture_1
Jack: JackClient::Connect src = system:capture_1 dst = projectM-jack:input
Jack: JackClient::ClientNotify ref = 3 name = projectM-jack notify = 18
Jack: JackGraphManager::RecalculateLatency port_index = 23
Jack: JackClient::ClientNotify ref = 3 name = projectM-jack notify = 18
Connecting to Jack port system:capture_2
Jack: JackClient::Connect src = system:capture_2 dst = projectM-jack:input
Connecting to Jack port system:capture_3
Jack: JackClient::Connect src = system:capture_3 dst = projectM-jack:input
Connecting to Jack port system:capture_4
Jack: JackClient::Connect src = system:capture_4 dst = projectM-jack:input
Connecting to Jack port system:capture_5
Jack: JackClient::Connect src = system:capture_5 dst = projectM-jack:input
Connecting to Jack port system:capture_6
Jack: JackClient::Connect src = system:capture_6 dst = projectM-jack:input
Connecting to Jack port system:capture_7
Jack: JackClient::Connect src = system:capture_7 dst = projectM-jack:input
Connecting to Jack port system:capture_8
Jack: JackClient::Connect src = system:capture_8 dst = projectM-jack:input
Connecting to Jack port system:capture_9
Jack: JackClient::Connect src = system:capture_9 dst = projectM-jack:input
Connecting to Jack port system:capture_10
Jack: JackClient::Connect src = system:capture_10 dst = projectM-jack:input
Connecting to Jack port system:capture_11
Jack: JackClient::Connect src = system:capture_11 dst = projectM-jack:input
Connecting to Jack port system:capture_12
Jack: JackClient::Connect src = system:capture_12 dst = projectM-jack:input
Connecting to Jack port exaile.py:out_autoaudiosink0-actual-sink-jackaudio_1
Jack: JackClient::Connect src = exaile.py:out_autoaudiosink0-actual-sink-jackaudio_1 dst = projectM-jack:input
Connecting to Jack port exaile.py:out_autoaudiosink0-actual-sink-jackaudio_2
Jack: JackClient::Connect src = exaile.py:out_autoaudiosink0-actual-sink-jackaudio_2 dst = projectM-jack:input
Jack: JackClient::ClientNotify ref = 3 name = projectM-jack notify = 18
Jack: JackGraphManager::RecalculateLatency port_index = 23
Jack: JackClient::ClientNotify ref = 3 name = projectM-jack notify = 18
Jack: JackClient::ClientNotify ref = 3 name = projectM-jack notify = 18
Jack: JackGraphManager::RecalculateLatency port_index = 23
Jack: JackClient::ClientNotify ref = 3 name = projectM-jack notify = 18
Jack: JackClient::ClientNotify ref = 3 name = projectM-jack notify = 18
Jack: JackGraphManager::RecalculateLatency port_index = 23
Jack: JackClient::ClientNotify ref = 3 name = projectM-jack notify = 18
Jack: JackClient::ClientNotify ref = 3 name = projectM-jack notify = 18
Jack: JackGraphManager::RecalculateLatency port_index = 23
Jack: JackClient::ClientNotify ref = 3 name = projectM-jack notify = 18
Jack: JackClient::ClientNotify ref = 3 name = projectM-jack notify = 18
Jack: JackGraphManager::RecalculateLatency port_index = 23
Jack: JackClient::ClientNotify ref = 3 name = projectM-jack notify = 18
Jack: JackClient::ClientNotify ref = 3 name = projectM-jack notify = 18
Jack: JackGraphManager::RecalculateLatency port_index = 23
Jack: JackClient::ClientNotify ref = 3 name = projectM-jack notify = 18
Jack: JackClient::ClientNotify ref = 3 name = projectM-jack notify = 18
Jack: JackGraphManager::RecalculateLatency port_index = 23
Jack: JackClient::ClientNotify ref = 3 name = projectM-jack notify = 18
Jack: JackClient::ClientNotify ref = 3 name = projectM-jack notify = 18
Jack: JackGraphManager::RecalculateLatency port_index = 23
Jack: JackClient::ClientNotify ref = 3 name = projectM-jack notify = 18
Jack: JackClient::ClientNotify ref = 3 name = projectM-jack notify = 18
Jack: JackGraphManager::RecalculateLatency port_index = 23
Jack: JackClient::ClientNotify ref = 3 name = projectM-jack notify = 18
Jack: JackClient::ClientNotify ref = 3 name = projectM-jack notify = 18
Jack: JackGraphManager::RecalculateLatency port_index = 23
Jack: JackClient::ClientNotify ref = 3 name = projectM-jack notify = 18
Jack: JackClient::ClientNotify ref = 3 name = projectM-jack notify = 18
Jack: JackGraphManager::RecalculateLatency port_index = 23
Jack: JackClient::ClientNotify ref = 3 name = projectM-jack notify = 18
Jack: JackClient::ClientNotify ref = 3 name = projectM-jack notify = 18
Jack: JackGraphManager::RecalculateLatency port_index = 23
Jack: JackClient::ClientNotify ref = 3 name = projectM-jack notify = 18
Jack: JackClient::ClientNotify ref = 3 name = projectM-jack notify = 18
Jack: JackGraphManager::RecalculateLatency port_index = 23
Jack: JackClient::ClientNotify ref = 3 name = projectM-jack notify = 18
[PresetFactory] path is r/share/projectM/presets/Fvese - Quicksand.milk
[PresetFactory] url is /usr/share/projectM/presets/Fvese - Quicksand.milk
[PresetFactory] path is r/share/projectM/presets/Aderrasi - Airs.milk
[PresetFactory] url is /usr/share/projectM/presets/Aderrasi - Airs.milk
[PresetFactory] path is r/share/projectM/presets/Aderrasi - Blender.milk
[PresetFactory] url is /usr/share/projectM/presets/Aderrasi - Blender.milk


Merci d'essayer, moi je ne voit pas.
<<

nau

Message(s) : 383

Inscription : Ven 19 Nov 2010 00:06

Localisation : Liège, Belgique

Message Mer 27 Juin 2012 22:14

Re: ProjetM ne tourne pas (2.6.32-41-lowlatency)

Je vois bien les différences, que j'imagine liées au fait que l'on n'utilise pas la même version du noyau, mais je ne vois rien qui attire mon attention, désolé. (enfin, c'est pas comme si j'y connaissais qqch, hein :-))
D'après les messages tout semble bien se connecter, et j'imagine que dans Patchage tu en as confirmation.
Si j'étais à ta place, je déconnecterais (machinalement, en mode 'ça ne coûte rien') toutes les captures pour ne garder qu'Exaile, mais je fiche mon billet que ça ne changera rien !

Nau

Retour vers Problèmes et bugs

Qui est en ligne ?

Utilisateur(s) parcourant ce forum : Aucun utilisateur inscrit et 1 invité

cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by ST Software for PTF.
Traduit en français par Maël Soucaze.